This articel i explain how to configuration mikrotik using pc for router.
1. Configuration position of ADSL connection
modem —Mikrotik—-Switch —– Client
|
Client
a. Modem IP –>> 192.168.1.1
b. Mikrotik Using 2 Interface - Ether1 —->> 192.168.1.2
- Ether1 —->> 192.168.0.254
c. Switch — Client ip 192.168.0.1-253
2. Configuration step router pc mikrotik
a. add ip address to interface 1
/ip address add interface=ether1 address = 192.168.1.1 netmask= 255.255.255.0
b. add ip address to interface2
/ip address add interface=ether2 address = 192.168.0.1 netmask= 255.255.255.0
c. to see input of interface
/interface print
d. Set Value name off interface
/inteface set 0 name=”Public” –>> For Modem
/inteface set 1 name=”Lan” –>> For Lan
e. set routing for net ( modem )
/ip route add gateway=192.168.0.1
f. set dns server ISP
/ip dns set primary-dns=203.130.193.74 secondary-dns=202.134.0.155
/ip dns set allow-remote-requests=yes
g. set of nat the router pc to sharing bw to lan
/ip firewall nat add chain=srcnat out-inteface=Public action=masquerade
sumber :http://yoyok.wordpress.com
March 19th, 2010 on 7:56 pm
kemungkinan yang pertama adalah cek di layer 1 yaitu kabel / hub / lan card kemudian
mas coba dial user speedy nya(ppoe) di letak kan di mikrotik jadi modem nya di mode bridge
atau dhcp di modem di disable dulu,,
setelah B/w di setting(Simple quee) coba gunakan B/W tools bandiwth test(download di mikrotik.com) dari sisi client ke arah router(mikrotik) dan
dari sisi client 1 ke client 2
jika hasil test B/w sudah sesuai dengan yang di setting di mikrotik coba lakukan download…
selamat mencoba
info lebih lanjut –> hub via YM saya : anto_chuakev